Приветствую Вас, Гость
[ Новые сообщения · Участники · Правила форума · Поиск · RSS ]
  • Страница 1 из 3
  • 1
  • 2
  • 3
  • »
Форум » Nokia » Nokia BB5 » ..:: 31/5/2009 Phoenix (Internal) 2009.12 - improved setup (Последняя версия Phoenix free crack)
..:: 31/5/2009 Phoenix (Internal) 2009.12 - improved setup
slava-yunДата: Вторник, 02.06.2009, 07:09 | Сообщение # 1
Admin
Группа: Администраторы
Сообщений: 499
Репутация: 2
Статус: Offline
..:: 31/5/2009 Phoenix (Internal) 2009.12 - improved setup (patched)::..
I decided to drop the old installer and create something more flexible. Changelog:

- works with Windows 7/Vista (32 bit) - as of Win7 RC1,
- you can install Phoenix Internal during setup,
- you can uninstall Phoenix via Control Panel or Start Menu icon,
- setup loads much faster (due to reduced compression ratio),
- reduced (even more) risk of installation problems,

I am pretty sure I have covered all the goals I was facing when I started to release Phoenix. I will concentrate on updating Phoenix to latest versions.

http://rapidshare.com/files/239297039/Phoenix_2009.12_v2.exe


Потеряешь Славу - потеряешь все.
 
slava-yunДата: Четверг, 15.10.2009, 11:42 | Сообщение # 2
Admin
Группа: Администраторы
Сообщений: 499
Репутация: 2
Статус: Offline
30.09.2009 - Phoenix Service Software - 2009.34.6.39750
Phoenix Service Software version 2009.34.6.39750 has been released.

* Multi protocol (including support for CDMA, GSM, TDMA and WCDMA)

This Phoenix Service Software installation package includes following SW
components:

* Phoenix Service Software 2009.34.6.39750
* DK2 Dongle Driver v 7.14.0.25
* Nokia Connectivity Cable USB Driver v 7.1.17.0 (for Win2000 driver
version 6.85.15.0)
* Flash Update Package 09.038.019
* FLS-x Dongle Driver v 2.09.28
* FPS-11 version 5.10.0

Changes/improvements made from previous version 2009.20.10.39068:

New products supported:

* RM-614,RM-635, RM-559, RM-551, RM-552, RM-615, RM-381, RM-598,
* RM-604, RM-588, RM-594, RM-593, RM-625, RM-612, RM-622, RM-623,
* RM-624, RM-596, RM-597, RM-576, RM-577, RM-584

Product support removed:

* RM-541

New features:

* Touch Screen Calibration
* ALS Tuning Wizard

Error corrections & changes:

* Flash Update Package 09.038.019
* Autotuning improvements
* Correction to “Autotune PAPI SOAP Error”
* Improvements for occasional “Data Package Not Found” – error during
flashing
* Changes to label printing
* Information shown on the UI if font “Arial Narrow” can not be found on
your PC
* Please check the label after printing, so that all texts are properly
aligned
* If your label looks ok, you don`t need to do anything.
* If you detect any problems, l “Arial Narrow” font needs to be installed. It
is normally included for example in the Office package.

Known errors & limitations:

* Software downgrade with Tucson system is only possible for BB 5.0
products supporting the Data Package 2 concept.
* Flashing with FLS-5, SS-46 and product specific adapter is not reliable for
all BB 5.0 products.
* If you install old DCT-4 data packages, Flash Update Package File
installation path may be wrong. This is caused by very old DCT-4 data
packages which contain Flash Update Package and overwrite current
information during installation. If you experience problems when updating
FPS-x prommers, please check that Phoenix “Prommer maintenance” is
looking for the files from the correct location which is “C:\Program
Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error
“Update via ini – file failed”. In this case, select “Update” from that Phoenix
“Prommer maintenance” – UI, browse to correct directory and select
“fpsxupd.ini” for all other prommers except the FPS-8.
* Multi Flash has limited capabilities, launch Multiflash UI first and then
connect phones one by one, do not attempt to service more than 5
phones at the time
* Some phone models request SIM Lock data to be written in wrong format.
You should use special DLL as a workaround for this product software
related problem. Please see Common SB SB-102 “Tucson Add-On
Components for SIM Lock version
* While performing restore or variant change operations with Tucson
system firmware update as a separate activity may increase stability.
* DCT-4 IMEI / ESN Rebuild functionality is limited. Corrections will be
available in an additional Phoenix release estimated for week 43/2009
Operating band reading / writing may not work for all products (e.g.
RM-159), due to implementation in phone SW. Phoenix modifications
will be available in an additional Phoenix release estimated for week
43/2009. This function can also be done via phone keypad.

http://mt-box.nazwa.pl/pub....750.exe


Потеряешь Славу - потеряешь все.
 
slava-yunДата: Четверг, 15.10.2009, 11:42 | Сообщение # 3
Admin
Группа: Администраторы
Сообщений: 499
Репутация: 2
Статус: Offline
Вот его свежекрякнутая версия от PhoenixSlayer:
http://rs630.rapidshare.com/files/29...009.34.exe.exe
Но это только USB - редакция.

Уважаемые форумчане, может кто выложить отдельным пакетом Flash Update Package 09.038.019 ????????????

http://rs630.rapidshare.com/files/292366448/Phoenix_2009.34.exe.exe


Потеряешь Славу - потеряешь все.
 
slava-yunДата: Четверг, 15.10.2009, 11:43 | Сообщение # 4
Admin
Группа: Администраторы
Сообщений: 499
Репутация: 2
Статус: Offline
http://www.gsmforum.su/showthread.php?p=245771#post245771

Потеряешь Славу - потеряешь все.
 
slava-yunДата: Пятница, 15.01.2010, 15:22 | Сообщение # 5
Admin
Группа: Администраторы
Сообщений: 499
Репутация: 2
Статус: Offline
Phoenix Service Software 2009.34.14.40684 Free

Supported Modeles:
PHOENIX SERVICE SOFTWARE 2009_34_14_40684 Cracked(no need dongle anymore)

free by Macleo

2. INTRODUCTION
New version of Phoenix service software is available. This multi-protocol service software supports Nokia CDMA, GSM, TDMA, and WCDMA products.

Service SW installation packages and Technical Bulletins are available from NOL.

Main component versions in the release:

· DK2 Driver Version 07.14.0.25
· Nokia Connectivity Cable USB Driver Version 7.1.17.0 (For Win2000 driver version 6.85.15.0)
· Flash Update Package 09.048.024
· FLS-x Drivers Version 2.09.28
· FPS-11Version 5.10.0

3. MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2009.34.10.40495

New Products added

· RM-614, RM-615, RM-381, RM-598 , RM-604, RM-582, RM-521, RM-522, RM-658, RM-638, RM-606, RM-664, RM-626

New features

· Flash Update Package 09.048.024
· RF Final Test – feature added.
- If you can find “RF Final Test” item from “Testing” – menu when product is connected, product supports this function
- RF Final test uses the same product specific configuration file as RF Auto Tuning and works when same equipment and tools are used
- If you experience problems with either function, please check the other.
- If either one works, please report issue to the product program so that data package configuration can be checked.

http://rapidshare.com/files....com.rar


Потеряешь Славу - потеряешь все.
 
slava-yunДата: Среда, 20.01.2010, 18:16 | Сообщение # 6
Admin
Группа: Администраторы
Сообщений: 499
Репутация: 2
Статус: Offline
Phoenix Internal Service Software 2009.20.10.39068 + JAF Software 1.98.62 + MobiMB 3.
Phoenix Internal Service Software 2009.20.10.39068 + JAF Software 1.98.62 + MobiMB 3.5.31 Rus - сборка №4

В проект 4-й сборки вошли Phoenix Internal Service Software 2009.20.10.39068, JAF Software 1.98.62 и MobiMB Browser 3.5.31 Rus. Инсталлятор на русском языке. Установка сборки в один клик быстрым и/или скрытным ключём.

Программы и драйвера в 4-й сборке проекта:
- Phoenix Internal Service Software 2009.20.10.39068;
- J.A.F. Software 1.98.62 (addon 2.0 by JayDi);
- MobiMB Media Browser 3.5.31 Rus;
- NaviFirm 0.1;
- Nokia Unlocker 1.0b Rus;
- Nokia Connectivity Cable Driver 7.1.17 Rus (NCCD);
- MSXML 6 Parser.
Все эти компоненты сборки ставятся автоматически без возможности выбора.
======================
Возможности программ:
- Прошивка телефона в Normal и Dead - режимах (Phoenix, JAF);
- Прошивка через Prommer Tool (Phoenix);
- Downgrading - откат на более раннюю версию прошивки (JAF);
- Phoenix Browser - просмотр и работа со (скрытыми) папками и файлами в телефоне (Phoenix);
- MobiMB Browser - работа через USB, Bluetooth, IrDa со (скрытыми) папками и файлами (MobiMB);
- Закачка прошивок для любого телефона и продукт-кода прямо с серверов Nokia (Phoenix, NaviFirm);
- Полноценная работа с Product Profile через *.ppu (Phoenix);
- Format C - форматирование внутренней памяти телефона без перепрошивки (Phoenix, JAF);
- Простое сохранение и восстановление настроек Product Profile через *.pp (Phoenix, JAF);
- Сохранение, восстановление, редактирование телефонной книги через Phonebook.txt (Phoenix);
- Сохранение, восcтановление Permanent Memory (PM) телефона или отдельных её блоков (Phoenix, JAF);
- Смена продукт-кода (Phoenix, JAF);
- Вскрытие защитного кода телефона (JAF, Nokia Unlocker);
- Вскрытие пароля карты памяти (Nokia Unlocker);
- Снятие скриншотов с экрана телефона, в том числе с java-игр и java-приложений (Phoenix);
- Множество других настроек телефона доступных на вкладке Testing (Phoenix);
- Новые "горячие клавиши" в Phoenix : F5 - Normal Mode, F6 - Local Mode, F7 - Test Mode.
Дополнительная инфа в файле Phoenix & JAF.txt.
===================================
Список изменений в 4-й сборке проекта:
- Базовой платформой данной сборки является стабильный Phoenix Internal Service Software 2008.41.4.35870;
- Все возможные компоненты сборки обновлены до версии Phoenix 2009.20.10.39068;
- В Phoenix Browser, Product Menu и Phoenix.ini вписана поддержка всех моделей вплоть до RM-634;
- Убран DK2 Driver и все его компоненты;
- Обновлён jaf_nok4models.ini;
- В сборку вставлен новый драйвер NCCD 7.1.17 Rus;
- В MobiMB добавлена поддержка скрытых дисков на Nokia 3600 Slide, 3610 Fold, 3720 Сlassic, 6600i Slide;
- Ключ Delete.cmd при удалении сборки также удаляет и оставшиеся после неё файлы и папки.
=============================
Пароль на архив: *#0000#.
-----------------------------
Контрольная сумма MD5: 0DD2F3B34DA464814A71C3F0F3F038D7.

http://rapidshare.com/files/283093211/Phoenix-JAF.part1.rar
http://rapidshare.com/files/283093288/Phoenix-JAF.part2.rar
Доступно только для пользователей


Потеряешь Славу - потеряешь все.
 
slava-yunДата: Пятница, 05.03.2010, 15:53 | Сообщение # 7
Admin
Группа: Администраторы
Сообщений: 499
Репутация: 2
Статус: Offline
Phoenix Service Software 2010.08.004.41526 Cracked

This Phoenix Service Software installation package includes following SW
components:
- Phoenix Service Software 2010.8.4.41526
- DK2 Dongle Driver v 7.14.0.25
- Nokia Connectivity Cable USB Driver v 7.1.23.0
- Flash Update Package 09.050.025
- FLS-x Dongle Driver v 2.09.28

Changes/improvements made from previous version 2009.34.14.40684:
New products added:
- RM-601, RM-656, RM-657, RM-659, RM-559, RM-610, RM-618, RM-639,
RM-632, RM-633, RM-634
Products removed:
- RM-623

New features:
- Nokia Connectivity Cable USB Driver Version 7.1.23.0
- Flash Update Package 09.050.025
- Menu item WLAN Auto tune added for E72 product
- New RF Losses.ini v 47 for auto tune
- Product Code Change – window is now scalable, SW version information
for variants can now be seen if window is made larger.
Error corrections & changes:
- Support for FPS-8 and FPS-11 Flash Prommers removed
- Bluetooth Flasher – menu removed
- Flash Memory test removed
- Changes to WLAN UI to support new WLAN component versions
- Auto tuning components updated to new version
- Label printing changes to improve handling of older data package
configurations. If product has older data package configuration, the user is
advised to enable this option from the label printing UI
- Improvements to Data Package Download. When computer has active
internet connection, product code specific SW files are downloaded from
Firmware Repository. Please note that the path for downloading files
must also be configures to “Options / Product Location” - UI. If paths
are not the same, downloaded SW files are not found.
- Registration error for manual TX power level tuning component corrected.
- Minor menu Changes for RM-598 and RM-604
Known errors & limitations:
- Software downgrade with Tucson system is only possible for BB 5.0
products supporting the Data Package 2 concept.
- Flashing with Flashing with FLS-5, SS-46 and product specific adapter is
not supported anymore
- If you install old DCT-4 data packages, Flash Update Package File
installation path may be wrong. This is caused by very old DCT-4 data
packages which contain Flash Update Package and overwrite current
information during installation. If you experience problems when updating
FPS-x prommers, please check that Phoenix “Prommer maintenance” is
looking for the files from the correct location which is “C:\Program
Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error
“Update via ini – file failed”. In this case, select “Update” from that Phoenix
“Prommer maintenance” – UI, browse to correct directory and select
“fpsxupd.ini” for all other prommers except the FPS-8.
- Multi Flash has limited capabilities, launch Multiflash UI first and then
connect phones one by one, do not attempt to service more than 5
phones at the time
- Some phone models request SIM Lock data to be written in wrong format.
You should use special DLL as a workaround for this product software
related problem. Please see Common SB SB-102 “Tucson Add-On
Components for SIM Lock version”
- While performing restore or variant change operations with Tucson
system firmware update as a separate activity may increase stability.
- Refurbishment flashing and product code change for RX-51 product
requires SX-4 card to be available
- FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21
prommer with new HW version is needed to correct this, and it is
estimated to be available during 2nd half of 2010
- Please refer to product specific documents and instructions
concerning the limitations of the RX-51 product

http://rapidshare.com/files....526.rar

http://www.4shared.com/file....00.html


Потеряешь Славу - потеряешь все.
 
slava-yunДата: Пятница, 18.06.2010, 11:20 | Сообщение # 8
Admin
Группа: Администраторы
Сообщений: 499
Репутация: 2
Статус: Offline
Это сломанный? Кто-нибудь ставил? Изменения не очень большие.

вот ломанная версия :

hello,the latest phoenix,cracked
1. Change history 4.6.2010 Initial version
Main component versions in the release:
▪ DK2 Driver Version 07.14.0.25
▪ Nokia Connectivity Cable USB Driver Version 7.1.27.0
▪ Flash Update Package 09.050.025
▪ FLS-x Drivers Version 2.09.28
Please note:
▪ This version contains the latest Tucson components. Therefore it is not necessary to use Tucson Add-On Installation Package v.2010_10_9_41709.

2. Main changes & error corrections from previous version 2010. 12.8.42304
New Products added :
▪ RH-125
New features :
▪ New rf_losses.ini file for RF auto tuning
▪ Support for RH-125 product enabled, Drivers for RH-125 adapter added to installation package
▪ DCT-4 Product code changes can now be done for RH-125.
- Use EXTERNAL Smart Card Reader for SX-4 or 4T, follow reader specific instructions
- Install Phoenix with included Prolific drivers ( you many need to reboot PC during process)
- Install the latest RH-125 Data Package(s)
- Connect CA-101 USB Cable to PC USB Port, and SF-204 adapter to USB Cable
- Allow Windows to install drivers for SF-204 adapter
- Start Phoenix
- Configure connection from FUSE Connection Manager by using following Settings:
- Connection Type: FBUS
- Communication Port Type: USB-COM ( Please scan FBUS Devices from FUSE)
- Connect RH-125 product to SF-204 adapter, check that FUSE detects RH-125 product in connection (select correct connection from "Connections" - dropdown)
- Scan product from "File / Scan Product" - menu , or press CTRL+R
- Select "Product Code Change DCT-4" from "Tools" - menu
- The rest of the process is normal DCT-4 Product Code Change.
- NOTE: Do NOT select "Flash" - option, always perform product code change without flashing the phone when using Phoenix for RH-125.
- NOTE: After Product Code Change, flash the latest SW version matching new product code by using Nokia Care Suite. Phoenix should only be used for product code changes concerning SIM Locked variants. All other service activities for RH-125 should be done by using Nokia Care Suite
Error Corrections & changes
▪ Tucson improvements for RM-614,
▪ Use of separate Tucson add on installation package is not required with this Phoenix release

3. Known errors & limitations
▪ Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
▪ Flashing with setup FLS-5, SS-46 and product specific adapter is not supported anymore
▪ If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite current information during installation. If you experience problems when updating FPS-x prommers, please check that Phoenix "Prommer maintenance" is looking for the files from the correct location which is "C:\Program Files\Common Files\Nokia\Tss\Flash". If not, Phoenix will show error "Update via ini - file failed". In this case, select "Update" from that Phoenix "Prommer maintenance" - UI, browse to correct directory and select "fpsxupd.ini" for all other prommers except the FPS-8.
▪ Some phone models request SIM Lock data to be written in wrong format. You should use special DLL as a workaround for this product software related problem. Please see Service SW Application document "Tucson Add-On Components for SIM Lock versions"
▪ Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be available
▪ FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21 prommer with new HW version is needed to correct this, and it is estimated to be available by the end of 2010
▪ Please refer to product specific documents and instructions concerning the limitations of the RX-51 product
▪ RX-51 flashing does not work when CU-4 is used
▪ When new version 2010_12_8_42304 with FUSE connection manager is installed on top of older Phoenix versions, there may be an additional delay of several minutes when you start Phoenix for the first time. Please wait patiently; Phoenix will start after configuration is finished.
▪ When using Data Package download functions with online connection, download times may occasionally be long. This is not caused by Phoenix (or Care Suite). The download speed from online servers is occasionally is known to be slow, depending on how data is buffered on caching servers.
▪ Note concerning the installation and use with Administrator and User rights
- If you install Phoenix, start Phoenix and configure connections from FUSE connection manager as Administrator, you may not be able to start Phoenix after you log off and try to use Phoenix with User Rights afterwards
▪ If you experience the above mentioned problem:- Log on as Administrator
- Deleted Fuse folder and its contents from: C:\Documents and Settings\All Users\Application Data\Nokia\
- After this Fuse's connection list will be empty and it can be used directly with guest/admin rights.
- This has to be done only once.
▪ After you close Phoenix, it may not restart. To rectify this:
- Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or optionally restart your PC

Supported operating systems and user rights
▪ Windows XP Service Pack 1 or higher
▪ When installing Phoenix into Win XP you must have local admin rights.
▪ When using in Win XP, user must have power user rights.

File:Phoenix Service Software 2010.12.11.42838 Cracked.rar
MD5:C3F75FD4BE9399CECCD354D892171838
SHA1:858421F41A2A7A6CA32DEFF9DFD4EA0BB02E1BC3

http://rapidshare.com/files....ked.rar


Потеряешь Славу - потеряешь все.
 
slava-yunДата: Среда, 18.08.2010, 19:38 | Сообщение # 9
Admin
Группа: Администраторы
Сообщений: 499
Репутация: 2
Статус: Offline
Phoenix_Service_Software_2010_24_3_43250
HELLO,
Latest phoenix software. have a nice day.

NEW MULTI PROTOCOL PHOENIX SERVICE SOFTWARE VERSION 2010.24.3.43250
New version of Phoenix service software is available. This multi-protocol service software supports Nokia CDMA, GSM, TDMA, and WCDMA products.
Phoenix Service Software version 2010.24.3.43250 has been released.Version 1 2.7.2010 Initial version
Please note:This version contains the latest Tucson components. Therefore it is not necessary to use Tucson Add-On Installation Package v.2010_10_9_41709.
Improvements concerning the case where phone models request SIM Lock data to be written in wrong format have been included. Therefore it is not necessary to
use special DLL´s or Tucson Add-On Components for SIM Lock versions anymore.
For all Tucson activities, use of components included in this release is enough, please do not use any previously released Tucson – related dll´s or add on packages
Main component versions in the releaseK2 Driver Version 07.14.0.25
Nokia Connectivity Cable USB Driver Version 7.1.27.0
Flash Update Package 10.20.001
FLS-x Drivers Version 2.09.28
2. Main changes & error corrections from previous version 2010.12.11.42838New Products added
• RM-684, RM-718, RM-693, RX-83, RX-85, RM-702, RM-688, RM-694, RM-695, RM-709, RM-639, RM-683, RM-666, RM-667, RM-712, RM-704, RM-711, RM-675, RH-125, RM-692New features
• Connection refresh – button added directly to Phoenix UI. Refreshing connection is now possible without opening FUSE Connection Manager separately, use of
older “manual CU-4 initialization” – menu is not needed if CU-4 is paired with the connection and “refresh” – function is used.
• New version of FUSE connection Manager
• New version of Flash Update Package
• Phoenix can now use product codes which contain alpha characters in addition to numbersError Corrections & changesImprovements concerning the case where phone models request SIM Lock data to be written in wrong format have been included.
EM Calibration and RSSI Reading improvements for RM-497 and products using same engine
Improvements for ALS Calibration in Light Swap Modules
Improvements to FM radio control
Improvements to touch display testing
Improvements to label printing alignment, displaying factory list and label printer setup
Correction to problems when DP path contains diacritical signs
Improvements to proximity sensor UI size
Flashing improvements for RX-51
Improvements to phone information reading
Improvements for CU-4 use and connectivity
• Some obsolete product specific testing menu’s removed from all products in package
- PPC analyzer
- PPC online
- PPC reporting
- FPS-8C Flash
- FPS-8C Flash Pro
- FPS-11 Flash
- FPS-8C maintenance
- Bluetooth flasher
- Flash memory test
- WIMAX Autotune
- Show stored tunings
- PPC/Fault log archive & send
- Certificate backup tool
3. Known errors & limitationsSoftware downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
Flashing with setup FLS-5, SS-46 and product specific adapter is not supported anymore
If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This is caused by very old DCT-4 data packages which contain
Flash Update Package and overwrite current information during installation. If you experience problems when updating FPS-x prommers, please check that Phoenix
“Prommer maintenance” is looking for the files from the correct location which is “C:\Program Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error
“Update via ini – file failed”. In this case, select “Update” from that Phoenix “Prommer maintenance” – UI, browse to correct directory and select “fpsxupd.ini” for
all other prommers except the FPS-8.Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be available
FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21 prommer with new HW version is needed to correct this, and it is estimated to be available by the end of 2010
Please refer to product specific documents and instructions concerning the limitations of the RX-51 product
RX-51 flashing does not work when CU-4 is used
When version 2010_12_8_42304 or newer with FUSE connection manager is installed on top of older Phoenix versions, there may be an additional delay of several
minutes when you start Phoenix for the first time. Please wait patiently; Phoenix will start after configuration is finished.
When using Data Package download functions with online connection, download times may occasionally be long. This is not caused by Phoenix (or Care Suite). The
download speed from online servers is occasionally is known to be slow, depending on how data is buffered on caching servers.
Note concerning the installation and use with Administrator and User rights
- If you install Phoenix, start Phoenix and configure connections from FUSE connection manager as Administrator, you may not be able to start Phoenix after you
log off and try to use Phoenix with User Rights afterwardsIf you experience the above mentioned problem:
- Log on as Administrator
- Deleted Fuse folder and its contents from: C:\Documents and Settings\All Users\Application Data\Nokia\
- After this Fuse’s connection list will be empty and it can be used directly with guest/admin rights.
- This has to be done only once.After you close Phoenix, it may not restart. To rectify this:
- Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or optionally restart your PCMass memory content file flashing does
not work for all products over USB – FPS-10 or FPS-21 Flash Prommer must be used!
4. Installation
If you have Phoenix External 2007.4.6.170 or older you must uninstall it before installing this release.
1. Download Phoenix_Service_Software_2010_24_3_43250.exe application file to your computer (e.g. C:\TEMP).
2. Close all other programs.
3. Run Phoenix_Service_Software_2010_24_3_43250.exe and follow instructions on the screen to install Phoenix Service Software
4. Connect a dongle (PK-1, PKD-1, FLS-4S, FLS-5) when message appears on the screen
5. If you are prompted to update any existing driver or file versions, select “yes”.
6. Depending on the operating system, the PC may require rebooting.
7. Allow Windows to register the Phoenix components.
8. Open Phoenix, use FUSE to configure connections depending on the tools you use
9. If you use CU-4, please pair the connection with service adapter by selecting “pair with service adapter” - option
10. Update your prommer with the latest software included in this installation package.
11. Install and use the latest available product specific data packages or flash bundles

это уже крякнутая версия, желательно снести старую и почистить реестр...
http://www.4shared.com/file/0XNZJuoe/PHOENI1EXE.html

проверил запускается если антивирь отключить

прога очистки реестра

Прикрепления: ___1.1.rar(6.9 Kb)


Потеряешь Славу - потеряешь все.
 
slava-yunДата: Среда, 29.09.2010, 11:32 | Сообщение # 10
Admin
Группа: Администраторы
Сообщений: 499
Репутация: 2
Статус: Offline
Phoenix_Service_Software_2010.24.008.43820_Cracked

Main component versions in the release:
• DK2 Driver Version 07.14.0.25
• Nokia Connectivity Cable USB Driver Version 7.1.31.0
• Flash Update Package 10.34.1.3
• FLS-x Drivers Version 2.09.28
1. Main changes & error corrections from previous version

New Products added
• RM-640, RM-662, RX-90

New features:
• New version of Autotuning and RF Losses
• New version of Flash Update Package
• New versions of Product and Instrument API

Error Corrections & changes
• RF Autotuning improvements for RM-497 and products using same engine enablingull repair service concept support for RM-497
• Improvements for ALS Calibration
• improvements to WLAN Size 4 TX tuning
• Improvements to CU-4 voltage settings
• Improvements to EM calibrations and CU-4 voltage handling
• Flashing improvements to dead phone flashing
• Improvements to label printing

Corrections to Genius cases # 158703, #156736, #160883, #160361, #162759, #159362, #160796, #156018, #157265

2. Known errors & limitations

• Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
• Flashing with setup FLS-5, SS-46 and product specific adapter is not supported anymore. FLS-5 is supported with phone specific cables only.
• If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite current information during installation. If you experience problems when updating FPS-x prommers, please check that Phoenix “Prommer maintenance” is looking for the files from the correct location which is “C:\Program Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error “Update via ini – file failed”. In this case, select “Update” from that Phoenix “Prommer maintenance” – UI, browse to correct directory and select “fpsxupd.ini” for all other prommers except the FPS-8.
• Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be available
• FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21 prommer with new HW version is needed to correct this, and it is estimated to be available by the end of 2010.
• Please refer to product specific documents and instructions concerning the limitations of the RX-51 product
• RX-51 flashing does not work when CU-4 is used
• When version 2010_12_8_42304 or newer with FUSE connection manager is installed on top of older Phoenix versions, there may be an additional delay of several minutes when you start Phoenix for the first time. Please wait patiently; Phoenix will start after configuration is finished.
• When using Data Package download functions with online connection, download times may occasionally be long. This is not caused by Phoenix (or Care Suite). The download speed from online servers is occasionally is known to be slow, depending on how data is buffered on caching servers.
• Note concerning the installation and use with Administrator and User rights
- If you install Phoenix, start Phoenix and configure connections from FUSE connection manager as Administrator, you may not be able to start Phoenix after you log off and try to use Phoenix with User Rights afterwards
• If you experience the above mentioned problem:
- Log on as Administrator
- Deleted Fuse folder and its contents from: C:\Documents and Settings\All Users\Application Data\Nokia\
- After this Fuse’s connection list will be empty and it can be used directly with guest/admin rights.
- This has to be done only once.
• After you close Phoenix, it may not restart. To rectify this:
- Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or optionally restart your PC
• Mass memory content file flashing does not work for all products over USB – FPS-10 or FPS-21 Flash Prommer must be used!

Please use only one connection for one Flash Prommer ( USB or TCPIP ). If both USB and TCPIP connection are configured to same Flash prommer, FUSE will be unstable.

Supported operating systems and user rights
• Windows XP Service Pack 1 or higher
• When installing Phoenix into Win XP you must have local admin rights.
• When using in Win XP, user must have power user rights.

http://rapidshare.com/files...._EN.rar


Потеряешь Славу - потеряешь все.
 
slava-yunДата: Среда, 29.09.2010, 12:22 | Сообщение # 11
Admin
Группа: Администраторы
Сообщений: 499
Репутация: 2
Статус: Offline
установил не на чистую систему вроде запускается
еще не проверял на телах
кто проверит отпишитесь


Потеряешь Славу - потеряешь все.
 
slava-yunДата: Среда, 03.11.2010, 11:48 | Сообщение # 12
Admin
Группа: Администраторы
Сообщений: 499
Репутация: 2
Статус: Offline
Phoenix_Service_Software_2010_38_5_44210.exe

http://depositfiles.com/en/files/u29x6ynnl

Phoenix_Service_Software_2010_38_5_44210.pdf

http://depositfiles.com/en/files/w8oa6qkvh

FLS-4Drv_2_09_28_exe.zip

http://depositfiles.com/en/files/1yo04wsgu

1. CHANGE HISTORY
Version 1 29.10.2010 Initial version

2. INTRODUCTION
New version of Phoenix service software is available. This multi-protocol service software supports Nokia CDMA, GSM, TDMA, and WCDMA products.

Please note:
• For all Tucson activities, use of components included in this release is enough, please do not use any previously released Tucson – related dll?s or add on packages
• Tucson activities will not work after 5:th of October unless you use Phoenix version 2010_24_8_43820 or newer

Main component versions in the release:
• DK2 Driver Version 07.14.0.25
• Nokia Connectivity Cable USB Driver Version 7.1.31.0
• Flash Update Package 10.42.000.7
• FLS-x Drivers Version 2.09.28

• FUSE Connection Manager v 2020.40.2.563.0

3. MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2010.24.8.43820

New Products added
• RM-717, RM-730, RM-726, RM-727, RM-728, RM-680, RM-697, RM-720, RM-719, RM-609, RM-610, RM-714, RM-735, RM-721, RM-722, RM-715, RM-698, RM-679, RM-691, RM-699, RX-90, RM-640, RM-662

New features
• Product Active Media – button added directly to Phoenix UI. Changing product media between FBUS and USB is now possible without opening FUSE connection Manager separately.
• New version of FUSE connection Manager
• New version of Flash Update Package
• New versions of Product and Instrument API
• New rf_losses.ini version 50 for autotune
• Changes for viewing Factory and SourceFactory country list in Label Printing UI
• Support for new SIM Lock format 3
• New Option “SW Reset” added to provide an optimized way to revive malfunctioning device. SW Reset updates software without using content files and it will try to preserve user data as much as possible.

NOTE: Current options for software updating in Phoenix are now the same as in Nokia Care Suite:
- Refurbish: Software will be updated with required content files. User data will be deleted. It is mandatory to have the content files installed on PC, otherwise Refurbishment process will be terminated. Before refurbishing, ensure that you back up user data with PC Suite.
- Update Software: Updates software. User data will be preserved.
- Reset Software: Updates software and resets settings to the factory defaults. Some user data can be lost.

• New multiflash UI that supports SW Reset and Restore User Product is renamed Update SW
• New GPS Control UI, earlier test UI can still be found in "Quick Test" tab
• Support for Windows 7 32 bit Operating system ( 64 bit version is not yet supported)

NOTE: To be able to use the help files in Windows 7 you need to install Windows Help program (WinHlp32.exe) for Windows 7. Ways to locate WinHlp32.exe:
- Start Phoenix with online connection to Internet, select "Help" and "Phoenix help". Click the "Microsoft Help and Support" website link. Download WinHlp32 and install it.
- Go to http://www.microsoft.com. Type "WinHlp32" to "Search Microsoft.com" - field. Locate Windows Help program (WinHlp32.exe) for Windows 7 and install it

Error Corrections & changes
• Improvements to Label Priting. Values given by user were earlier improperly read with some XML configurations
• PhoneInfo message timeout increased to 3 seconds to prevent problems for phones requiring long delay
• Obsolete menu items removed (Manual CU-4 Initialization etc)
• Improvements to phone information reading
• Improvements for CU-4 use and connectivity
• Corrections to Genius cases 161643, 167808, 163697, 162448, 163501, 163500, 167002
• RM-216 flash problem (file exists but not found) corrected
• Energy management IBAT Calibration improvements
• Improvements to USB dead phpne flashing
• Improvements to CU-4 connection without attached phone
• Changes to Tucson components for phones with "USB Only" - service concept (RM-596 etc with no FBUS connection available). Further improvements in next Phoenix releases enable Tucson operations without prommer.

NOTE:
- Product Code changes for USB Only - phones (RX-51, RM-596 etc) work only when used with FPS-21 Flash Prommer and USB connection from prommer rear panel to phone. Please select USB as Product Active Media
- Do not use "Flash" option simultaneously with product code change for USB Onbly phones, flash phone separately with Firmware Update


Потеряешь Славу - потеряешь все.
 
slava-yunДата: Среда, 03.11.2010, 11:48 | Сообщение # 13
Admin
Группа: Администраторы
Сообщений: 499
Репутация: 2
Статус: Offline
4. KNOWN ERRORS & LIMITATIONS
• Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
• Flashing with setup FLS-5, SS-46 and product specific adapter is not supported anymore
• If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite current information during installation. If you experience problems when updating FPS-x prommers, please check that Phoenix “Prommer maintenance” is looking for the files from the correct location which is “C:\Program Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error “Update via ini – file failed”. In this case, select “Update” from that Phoenix “Prommer maintenance” – UI, browse to correct directory and select “fpsxupd.ini” for all other prommers except the FPS-8.
• Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be available
• FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21 prommer with new HW version is needed to correct this, and it is estimated to be available by the end of 2010
• Please refer to product specific documents and instructions concerning the limitations of the RX-51 product
• RX-51 flashing does not work when CU-4 is used
• RX-51 Product Coie changes work only without FLASH option, please flash phone separately
• When version 2010_12_8_42304 or newer with FUSE connection manager is installed on top of older Phoenix versions, there may be an additional delay of several minutes when you start Phoenix for the first time. Please wait patiently; Phoenix will start after configuration is finished.
• When using Data Package download functions with online connection, download times may occasionally be long. This is not caused by Phoenix (or Care Suite). The download speed from online servers is occasionally is known to be slow, depending on how data is buffered on caching servers.• Note concerning the installation and use with Administrator and User rights:
- If you install Phoenix, start Phoenix and configure connections from FUSE connection manager as Administrator, you may not be able to start Phoenix after you log off and try to use Phoenix with User Rights afterwards
• If you experience the above mentioned problem:
- Log on as Administrator
- Deleted Fuse folder and its contents from: C:\Documents and Settings\All Users\Application Data\Nokia\
- After this Fuse’s connection list will be empty and it can be used directly with guest/admin rights.
- This has to be done only once.
• After you close Phoenix, it may not restart. To rectify this:
- Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or optionally restart your PC
• Mass memory content file flashing does not work for all products over USB, FPS-10 or FPS-21 Flash Prommer must be used!

5. INSTALLATION
If you have Phoenix External 2007.4.6.170 or older you must uninstall it before installing this release.

1. Download Phoenix_Service_Software_2010_38_5_44210.exe application file to your computer (e.g. C:\TEMP).
2. Close all other programs and detach all phones and prommers using USB connection from PC. Connect them after Phoenix is installed or updated
3. Run Phoenix_Service_Software_2010_38_5_44210.exe and follow instructions on the screen to install Phoenix Service Software
4. Connect a dongle (PK-1, PKD-1, FLS-4S, FLS-5) when message appears on the screen
5. If you are prompted to update any existing driver or file versions, select “yes”.
6. Depending on the operating system, the PC may require rebooting.
7. Allow Windows to register the Phoenix components.
8. Open Phoenix, use FUSE to configure connections depending on the tools you use
9. If you use CU-4, please pair the connection with service adapter by selecting “pair with service adapter” - option
10. Update your prommer with the latest software included in this installation package.
11. Install and use the latest available product specific data packages or flash bundles

Supported operating systems and user rights
• Windows XP Service Pack 1 or higher
• When installing Phoenix into Win XP you must have local admin rights.
• When using in Win XP, user must have power user rights

• Windows 7 32 Bit version

For HW & Tool requirements please refer to Service Repair Processes documents
For information on product specific data packages, tools and instructions please refer to service manuals and technical bulletins.

Phoenix Service Software 2010.38.005.44210 Cracked

http://depositfiles.com/files/lrr2lk8ow

не проверял


Потеряешь Славу - потеряешь все.
 
slava-yunДата: Среда, 03.11.2010, 12:09 | Сообщение # 14
Admin
Группа: Администраторы
Сообщений: 499
Репутация: 2
Статус: Offline
http://www.mediafire.com/?j1glijmcln1ijej

Потеряешь Славу - потеряешь все.
 
slava-yunДата: Вторник, 28.12.2010, 18:56 | Сообщение # 15
Admin
Группа: Администраторы
Сообщений: 499
Репутация: 2
Статус: Offline
Phoenix Service Software 2010.48.4.44602 Cracked

[FONT=微软雅黑]
[/FONT]

Code:
1. CHANGE HISTORY
Version 1 20.12.2010 Initial version 2. INTRODUCTION
New version of Phoenix service software is available. This multi-protocol service software supports Nokia CDMA, GSM, TDMA, and WCDMA products.
Main component versions in the release:
* DK2 Driver Version 07.14.0.25
* Nokia Connectivity Cable USB Driver Version 7.1.34.0
* Flash Update Package 10.46.000
* FLS-x Drivers Version 2.09.28
* FUSE Connection Manager v 2010.44.0.584

3. MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2010.38.5.44210
New Products added
* RM-757, RM-746, RM-729, RM-738, RM-739, RM-724, RM-725, RM-607, RM-608, RM-643, RM-644, RM-744, RM-745, RM-749
New features
* New Connectivity Cable driver
* New version of FUSE connection Manager
* New version of Flash Update Package
* New versions of Product API
* New PCCS library for Win 7 driver installation
* New common data package ******** taken in use. All Nokia Service Software Applications will use following ******** for product specific data:
- Windows XP: C:********s and SettingsAll UsersApplication DataNokiaPackages
- Windows 7: C:Program DataNokiaPackages

Error Corrections & changes
* Changes to GPS Control UI: Quick test - tab is now on top of the other tests when menu is launched
* Changes to Tucson components for phones with "USB Only" - service concept (RM-596, RM-675, RM-718 etc, which have no FBUS connection available)
* Some obsolete menu items removed
* Improvements to keyboard shortcut functionality
* Improvements to keyboard test
* Changes to File Sysytem Format and Password Erasing for phones with Symbian Operating System
* Changes to Band Information writing
* Improvements to Audio Control for RM-559
* Torch test added to Camera Control UI

Please note:
* This version contains the latest Tucson components. Therefore it is not necessary to use Tucson Add-On Installation Packages
* Before you start Phoenix or care Suite installation to Windows 7 the User Account Control (UAC) should be turned off from Windows Control Panel settings.
* For more information concerning new common data package ******** refer to separate Service SW ********ation
* For more information concerning new options in "Firmware Update" - menu, Current options in Firmware Update UI:
- Refurbish: Software will be updated with required content files. User data will be deleted. It is mandatory to have the content files installed on PC, otherwise Refurbishment process will be terminated. Before refurbishing, ensure that you back up user data with PC Suite.
- Update Software: Updates software. User data will be preserved. Optional Content files are not required because they are not programmed
- Reset Software: Updates software and resets settings to the factory defaults. Some user data can be lost.Optional Content files are not required because they are not programmed
- Product Code changes for USB Only - phones (RX-51, RM-596 etc) work only when used with FPS-21 Flash Prommer and USB connection from prommer rear panel to phone. Please select USB as Product Active Media
- Do not use Flash option simultaneously with product code change for USB Onbly phones, flash phone separately with Firmware Update
- It is recommeneded to use FPS-21 flash prommer with TCPIP connection when refurbishing USB Only - phones (RM-596 etc) due to mandatory optional MMC file size.

4. KNOWN ERRORS & LIMITATIONS
* Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
* Flashing with setup FLS-5, SS-46 and product specific adapter is not supported anymore
* If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite current information during installation. If you experience problems when updating FPS-x prommers, please check that Phoenix “Prommer maintenance” is looking for the files from the correct ******** which is “C:Program FilesCommon FilesNokiaTssFlash”. If not, Phoenix will show error “Update via ini – file failed”. In this case, select “Update” from that Phoenix “Prommer maintenance” – UI, browse to correct directory and select “fpsxupd.ini” for all other prommers except the FPS-8.
* Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be available
* RX-51 flashing does not work when CU-4 is used
* RX-51 Product Code changes work only without FLASH option, please flash phone separately
* When version 2010_12_8_42304 or newer with FUSE connection manager is installed on top of older Phoenix versions, there may be an additional delay of several minutes when you start Phoenix for the first time. Please wait patiently; Phoenix will start after configuration is finished.
* When using Data Package download functions with online connection, download times may occasionally be long. This is not caused by Phoenix (or Care Suite). The download speed from online servers is occasionally known to be slow, depending on how data is buffered on caching servers.
* Note concerning the installation and use with Administrator and User rights
- If you install Phoenix, start Phoenix and configure connections from FUSE connection manager as Administrator, you may not be able to start Phoenix after you log off and try to use Phoenix with User Rights afterwards
* If you experience the above mentioned problem:
- Log on as Administrator
- Deleted Fuse folder and its contents from: C:********s and SettingsAll UsersApplication DataNokia
- After this Fuse’s connection list will be empty and it can be used directly with guest/admin rights.
- This has to be done only once.
* After you close Phoenix, it may not restart. To rectify this, please use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or optionally restart your PC
* Mass memory content file flashing does not work for all products over USB – FPS-10 or FPS-21 Flash Prommer must be used!
* To be able to use the help files in Windows 7 you need to install Windows Help program (WinHlp32.exe) for Windows 7. Ways to locate WinHlp32.exe:
- Start Phoenix with online connection to Internet, select "Help" and "Phoenix help". Click the "Microsoft Help and Support" website link. Download WinHlp32 and install it.
- Go to Microsoft Corporation. Type "WinHlp32" to "Search Microsoft.com" - field. Locate Windows Help program (WinHlp32.exe) for Windows 7 and install it

* When using flash prommers, only one connection type to one prommer is allowed. Please use either NFPD USB or NFPD TCPIP connection to one prommer, not both connections to same prommer
5. INSTALLATION
If you have Phoenix External 2007.4.6.170 or older you must uninstall it before installing this release.
1. Download Phoenix_Service_Software_2010_48_4_44602.exe application file to your computer (e.g. C:TEMP).
2. Close all other programs.
3. Disconnect all flash prommers and phones which may be connected to PC via USB connection (reconnect them after Phoenix installation has bene completed)
4. Run Phoenix_Service_Software_2010_48_4_44602.exe and follow instructions on the screen to install Phoenix Service Software
5. Connect a dongle (PK-1, PKD-1, FLS-4S, FLS-5) when message appears on the screen
6. If you are prompted to update any existing driver or file versions, select “yes”.
7. Depending on the operating system, the PC may require rebooting.
8. Allow Windows to register the Phoenix components.
9. Open Phoenix, use FUSE to configure connections depending on the tools you use
10. If you use CU-4, please pair the connection with service adapter by selecting “pair with service adapter” - option
11. Update your prommer with the latest software included in this installation package.
12. Install and use the latest available product specific data packages or flash bundles
Supported operating systems and user rights
* Windows XP Service Pack 1 or higher
* When installing Phoenix into Win XP you must have local admin rights.
* When using in Win XP, user must have power user rights.
* Windows 7 32 Bit version

For HW & Tool requirements please refer to Service Repair Processes "Recommended hardware for PC"
For information on product specific data packages, tools and instructions please refer to service manuals and bulletins.
If you are installing this version of Phoenix on a new Imaged PC, and you are using FLS-4S or FLS-5 during the install, then install the FLS-X drivers first. Latest version of the FLS-X drivers is attached.

http://rapidshare.com/#!downl....2010.48 .4.44602.exe|102535

http://depositfiles.com/files/ya8a763d7


Потеряешь Славу - потеряешь все.
 
Форум » Nokia » Nokia BB5 » ..:: 31/5/2009 Phoenix (Internal) 2009.12 - improved setup (Последняя версия Phoenix free crack)
  • Страница 1 из 3
  • 1
  • 2
  • 3
  • »
Поиск: